GALE

MaxImum loading area (W*L)

• Width 84” × Length 144” – Model PG2136D
• Width 96” × Length 144” – Model PG2436D
• Width 96” × Length 168” – Model PG2442D
• Width 120” × Length 240” – Model YTA3060D

Minimum glass size

W4″ * L13″ * D17″

Glass thickness (upon request)

1/6″ – 3/4″

3/16″ – 3/4″

1/4″ – 3/4″

The dimensions shown correspond to standard models. Custom configurations and alternative furnace sizes can be engineered upon request to meet specific production and glass processing requirements.

Glass types

Clear float glass and tinted float glass.
Printed or enameled glass.
Low-e glass (Incl. 3-silver soft coat low-e).
Frosty, patterned (not all patterns), or sand blasted glass, often at lower production rate.

Glass quality standard and finished product ratio

Standard: latest versions of GB15763, EN12150 or ANSI Z97.1.
Finished Production Ratio ≥ 98%
As of 1/4″ clear tempered glass, Bow ≤ 0.06” per 40”, Roller wave 0.01” per 12”.
1/8” online inspection record to show flatness.

• Independently controlled heating zones for uniform temperature distribution.
• High-quality Cr20Ni80 heating elements for durability and efficiency.
• Powerful high-temperature convection fans (no water cooling required).
• Innovative aspiration system with heat recovery (70–80% heat recovery efficiency).
• Roller speed synchronization to eliminate surface defects.
• Optimized oscillation control for improved glass flatness and optical quality.
• Multi-zone flat chiller with trimmed quenching to reduce energy use and peak power load.